Integrated Pressurized Solar Water Heater With Heat Pipe

Integrated Pressurized Solar Water Heater High efficiency, rapid warming Work under the high pressure automatically

Integrated Pressurized Solar Water Heater With Heat Pipe

 Parameter of pressurized solar water heater

Vaccum Tube	GB-CU-SS-N/AL, 58-1800	Material of Insulation	Polyurethane
Diameter of Tank (mm)	380/480	Inner Tank	SUS304-2B,1.2mm
Thickness Insulated (mm)	50	Outer Tank	Drawbench Silversteel 0.4mm
Vent Connection (inch)	3/4	Frame	Coated Galvanized Steel 1.5mm
Water Connection (inch)	3/4	Test Pressure (pa)	1.0MPA
Electric Heater Connection(inch)	1	Operating Fluid Pressure (pa)	0.4MPA
Collector Angle (degree)	28/38/45

Features of pressurized solar water heater

1. High Efficiency, Rapid warming. The copper pipe in the heat pipe could transfer the energy into the cold water in the pressurized water tank rapidly.2. The whole pressure of the system is up to 1.5kg/M2. The inner hole could connect the top water directly, work under the high pressure automatically.3.  The pressurized water tank and copper pipe in the heat pipe adopt the mechanical  Seal advanced technology. Sometimes, although some of heat pipe are broken. The whole system still could go through very well.4.  The design for inner tank is reasonable and scientific, which could be held 100,000 times fatigue test without any damage.5. We take advantage of integrated foaming polyurethane technology. After foaming, inner tank, Cover of outer tank, and out tank compose an integral whole. Which perfect insulation layer's benefit?6.  The system could adapt series and parallel connection to supply hot water for collective organizations.

Parameter Table

Type	Area (m2)	Vaccum tube			Volume (liters)	Gross weight (kg)
		Length (mm)	Diameter Φ (mm)	Quantity (pcs)
IP01-18	2.29	1800	58	18	172	89
IP01-20	2.55	1800	58	20	190	101
IP01-24	3.06	1800	58	24	223	120
IP01-30	3.83	1800	58	30	274	141

Integrated Pressurized Solar Water Heater With Heat Pipe