water proof Phocos solar charge controller

water proof Phocos solar charge controller *IP68 protection *design for solar street light *optioanl:Infrared remote control

              Phocos solar charge controller

Ten times compensation for each replica (fraudulent,fake,ingeniune,sham) product found.

PV-Systems exposed to extreme weather/environmental conditions (street lights, navigation buoys, etc.) have increased risk for damage in the power electronics. In order to assure reliable battery charge control under such conditions, Phocos developed an encapsulated charge controller (IP68) to prevent corrosion: CIS.CIS is an industrial-grade charge controller that is suitable for all practical PV applications. High-quality, 4-stage PWM-charging is combined with amazing features such as: low-voltage disconnect, flexible load timer functions, and a multi-LED system status display. CIS is available in two versions:• Dual load to independently control two loads. • Output Dimming to save energy in lighting applications.The CIS has no moving parts, switches or buttons. Settings such as battery type, deep discharge thresholds, timers, etc. are made quickly and easily via infrared remote control accessory.All devices are connected to the controller by supplied lead wires rather than wire terminals. This feature eliminates the risk of damage from external influences (corrosion, dust, water, bugs, chemicals, physical shock) where components make electrical contact to the controller.The extremely compact aluminum housing even allows for mounting CIS inside street light poles. CIS was developed in accordance with well-established Phocos standards incorporating the latest technology, highest-quality and best possible cost/performance ratio.The CIS family is making room for some new members: the CIS-N and CIS-LED. The CIS-N and CIS-LED series have all the great features of the original CIS series, with the added benefit of negative grounding.The CIS-N is designed especially for applications in the gas and oil industry, such as remote monitoring, weather stations, valve controlling, SCADA, and many more.The CIS-LED combines three functions in one: Charge controller + flexible timer + LED drivers, making it perfect for users of solar LED lamps and solar LED street lights.Robust Aluminum HousingEpoxy Encapsulated PCB to Prevent Corrosion (IP68)Compact SizeInfrared Remote Control Programming Accessory (CU)Intelligent Timer FunctionsWidely ProgrammableExternal Temperature Sensor (Optional)4 Stage Battery Charging (Main, Float, Boost, Equalization)Dual load or Dimmable Load OutputAutomatic System Voltage Recognition (12/24 V) Type System voltageMax. charge/load currentFloat chargeMain chargeBoost chargeEqualizationDeep discharge protection: Cut-off voltageReconnect level Overvoltage protectionUndervoltage protectionMax. panel voltage(Overvoltage protection by varistor)Temperature compensation(Charge voltage)Max. self consumptionGroundingAmbient temperatureMax. heightBattery typeAdjustment range: Evening/morning hours Night/day detectionWire lengthDimensions (B x H x T )WeightWire cross sectionType of protectionTechnical data dimming outputDimming valueDimming output voltage

CIS 05 CIS 10 CIS 20

CIS-2L 05 CIS-2L 10 CIS-2L 20

12/24 V auto recognition

5 A 10 A 20 A

13.8/27.6 V (25 °C)

14.4/28.8 V (25 °C), 30 min. (daily)

14.4/28.8 V (25 °C), 2 hactivation: battery voltage <12.3/24.6 V

14.8/29.6 V (25 °C), 2 Std. activation: battery voltage <12.1/24.2 V (at least every 30 days)

11 – 12 V / 22 – 24 V12.8/25.6 V

15.5/31.0 V

10.5/21 V

55 V

−25 mV/K at 12 V−50 mV/K at 24 V

5 – 8 mA at 12 V6 – 10 mA at 24 V

positive grounding possible

−40 to +60 °C

4,000 m above sea level

lead acid (GEL, AGM, flooded)

0 – 15 h / 0 – 14 h2.5 – 10 V

10 cm

82 x 58 x 20 mm

150 g

1.5 mm2 1.5 mm2 2.5 mm2

IP68 (1.5 m, 72 h)

CIS 05 CIS 10 CIS 20

0 – 100% output power

0 – 10 V (max. 1 mA)

water proof Phocos solar charge controller