Small Marine Wind Turbine

Small Marine Wind Turbine Southwest Air X Carbon Fiber Composite Blades Aircraft quality aluminum alloy castings

Small Marine Wind Turbine 

Features 1. Microprocessor-Based Technology

  The Air X incorporates a new microprocessor-based technology that results in increased performance, improved battery charging capability, greater reliability and the reduction of “flutter” noise from the machine.

The controller allows for peak-power tracking of the wind by optimizing the alternator's output on all points of the cubic curve and efficiently delivers the energy to the battery. The turbine’s smart controller allows it to actually control blade rotation speed thus eliminating the buzzing noise commonly found with most small wind turbines.

2. Quieter operation

  Previous AIR wind modules relied on their aero-elastic blade design for protection in high winds. This caused a loud flutter noise in winds above 35 mph (16 m/s). The Air X circuit monitors the wind speed and electronically slows the blades as it reaches its rated output preventing it from going into flutter. This results in a much quieter wind turbine. In high winds, the Air X will continue to produce power at a reduced level until the wind decreases, at which point maximum potential output will resume.

3. Improved Battery Charging

  Previous AIR designs required 300-400 amp hour battery banks so the trickle charge of the wind turbine could be adequately absorbed. The Air X charge controller periodically stops charging, reads the battery voltage, compares it to the voltage setting and if the battery is charged, it completely shuts off all current going to the battery. This function is performed within a few milliseconds. The closer the battery is to reaching its full state of charge, the more often the Air X circuit repeats this action. This means any size battery bank from 25 to 25,000 amp hours or higher can be charged safely. When the battery has reached its charged state, the Air X will slow to an almost complete stop. Only when the battery has dropped below its voltage set point will it startup and resume charging.

Technical Specifications

Rotor Diameter	46 in (1.15m)
Weight	13 lb (5.85kg)
Shipping Dimensions	27×15×9 in (686×38×228 mm)  17lb (7.7 kg)
Mount	1.5 in schedule 40 pipe 1.9 in (48.26 mm) OD
Start-up Wind Speed	8 mph (3.58m/s)
Votalge	12, 24, and 48 VDC
Rated Power	400 watts at 28 mph (12.5m/s)
Turbine Controller	Microprocessor-based smart internal regulator with peak power tracking
Body	Cast aluminum (Marine is power coated for corrosion protection)
Blades	3-Carbon fiber composite
Overspeed Protection	Electronic torque control
Kilowatt Hourse per Month	38 kwh/mo at 12 mph (5.4m/s)
Survival Wind Speed	110 mph (49.2 m/s)
Warranty	3 year limited warranty

 Output power curve

Small Marine Wind Turbine